| |
|
|
PRODUCT NAME AND VISCOSITY:
Millfood Synth Hydraulic Oil
DESCRIPTION:
MILLFOOD SYNTHETIC HYDRAULIC OILS ISO 32, 46, 68.
Millfood Synthetic Hydraulic Oils are engineered for use when industry demands are beyond the capability of mineral oil based products.
They are available in three grades in the UK and provide outstanding service in all hydraulic pumps and motors such as vane, piston, radial piston and gear.
Additionally, they are multi-service fluids and can be used in the lubrication of circulating oil systems and airline lubricators.
APPLICATION:
Hydraulic pumps and motors - vane, piston, radial piston and gear.
Circulating oil systems.
TYPICAL CHARACTERISTICS:
MILLFOOD SYNTHETIC 32
Colour: Water-white
Base oil type: Synthetic PAO
ISO grade: 32
Specific gravity @20°C: 0.828
Kiematic Viscosity@40°C mm2/s: 32.2
Kinematic viscosity @100°C mm2/s: 6.01
Viscosity index: 134.9
Flash point°C: 253
Pour point°C: <-50
MILLFOOD SYNTHETIC 46
Colour: Water-white
Base oil type: Synthetic PAO
ISO grade: 46
Specific gravity @20°C: 0.832
Kiematic Viscosity@40°C: mm2/s 45.8
Kinematic viscosity @100°C: mm2/s 7.71
Viscosity index: 136.5
Flash point°C: 257
Pour point°C: <-50
MILLFOOD SYNTHETIC 68
Colour: Water-white
Base oil type: Synthetic PAO
ISO grade: 68
Specific gravity @20°C: 0.836
Kiematic Viscosity @40°C mm2/s: 68.1
Kinematic viscosity@100°C: mm2/s 10.3
Viscosity index: 136.6
Flash point°C: 276
Pour point°C: <-50
USER BENEFITS:
*USDA H-1 approved:
Use where incidental food contact may occur.
*Fully synthetic:
Long life, extended drain intervals.
*Elastomer compatible:
Long seal life, less leakage.
* High Viscosity Index and low pour point:
Ensure maximum performance over a wide operating range.
* Outstanding anti-wear properties:
Increase equipment efficiency and extend equipment life.
* Exceptional demulsibility:
Complete and rapid separation of oil and water.
* Rust and oxidation protection:
Reduce sludge and varnish build-up.
*Compatibility with other fluids:
Compatible with mineral oils and most synthetics (except silicone).
HEALTH AND SAFETY:
When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Health and Safety Department.
|