| |
|
|
PRODUCT NAME AND VISCOSITY:
Millfood Chain and Gear Oil
DESCRIPTION:
Fully synthetic food grade oil with characteristics that make it particularly suited for the lubrication of drive chains, conveyor chains and gearboxes and reduction units that are designed for an ISO 220 gearbox oil.
MILLFOOD 220 CHAIN & GEAR OIL contains special additives that extend relubrication intervals considerably and does not contain any mineral oil.
APPLICATION:
For drive and conveyor chains – Apply sparingly by brush or oil can as required.
Can also be applied automatically using a central drip feed system.
TYPICAL CHARACTERISTICS:
Appearance: Off white tacky oil
Base oil: Fully synthetic
Kinematic Viscosity (ASTM4451) @ 40C (typical): 220 cSt
@ 100C: 23.7cSt
Viscosity Index (ASTM D2270): 135
Demulsibility (ASTM D1401) 30 min: 40-37-3
Foaming (ASTM D892) After settling:
Sequence 1: Nil
Sequence 2: Nil
Sequence 3: Nil
Copper corrosion (ASTM D130): 1b
FZG Gear Test Stage: 11
Evaporation Loss 6.5 hrs @ 205C, 5 mass: 4.0
Operating temperature range: -30C to +240C
USER BENEFITS:
WHEN USED ON CHAINS
*Penetrates to the links and pins reducing wear and extending chain life
*Tackiness additives ensure non-drip, no fling thus providing lasting lubrication
*Excellent adhesive characteristics ensures a high degree of water resistance and protects parts from corrosion even in the presence of acidic materials commonly associated with the food and drinks industries
*Extremely wide temperature range ensures maximum application versatility
WHEN USED IN GEARBOXES
*Extremely good oxidation stability which extends lubricant life
*Unaffected by water – demulsibility ensures total separation of water from oil
*Tackiness additives coat gears effectively and provide anti-wear protection at start-up
*Synthetic oil with high Viscosity Index ensures reduced viscosity change with temperature increase
HEALTH AND SAFETY:
Health and Safety Data Sheets 2417-1 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department.
|